# Allow multiple paths to avoid worn areas

**URL:** <https://forum.yarbo.com/t/allow-multiple-paths-to-avoid-worn-areas/2082>\
**Category:** Suggestion and Feature Requests\
**Created:** [June 3, 2025, 5:43pm UTC](https://forum.yarbo.com/t/allow-multiple-paths-to-avoid-worn-areas/2082 "2025-06-03T17:43:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![david](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/david/32/279_2.png) [@david](https://forum.yarbo.com/u/david)\
**Post date:** [June 3, 2025, 5:43pm UTC](https://forum.yarbo.com/t/allow-multiple-paths-to-avoid-worn-areas/2082/1 "2025-06-03T17:43:37Z")

</div>

When navigating through an area to a further area to mow, Yarbo eventually creates very worn tramlines. Where there is a long overlapping border between 2 adjacent areas, it would be good to draw a wide path, so that Yarbo can then pick a different route (randomly or just moves a bit each time), so that it only occasionally covers the exact same route

---

<div class="post-metadata">

**Author:** ![Ken](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/ken/32/1001_2.png) [@Ken](https://forum.yarbo.com/u/Ken)\
**Post date:** [June 3, 2025, 10:45pm UTC](https://forum.yarbo.com/t/allow-multiple-paths-to-avoid-worn-areas/2082/2 "2025-06-03T22:45:18Z")

</div>

[Suggestion and Feature Requests - Yarbo Forum](https://forum.yarbo.com/c/25/l/latest?board=default) - “Yarbo should try to avoid …” and “Path Areas”