# antenna breakage
**URL:** https://forum.yarbo.com/t/antenna-breakage/3887
**Category:** Suggestion and Feature Requests
**Tags:** yarbo-antenna
**Created:** [September 16, 2025, 3:43am UTC](https://forum.yarbo.com/t/antenna-breakage/3887 "2025-09-16T03:43:02Z")
**Posts on this page:** 4
**Page:** 2
### Author:  [@jso](https://forum.yarbo.com/u/jso)
#### Post date: [October 21, 2025, 6:09pm UTC](https://forum.yarbo.com/t/antenna-breakage/3887/22 "2025-10-21T18:09:42Z")
Thank you very much for sharing again.
This file maybe will trigger finally unboxing of 3d printer I purchased time ago and placed in storage room.
I need good reason and extra time to start 3d printing and this is complicated.
---
### Author:  [@kinglerch](https://forum.yarbo.com/u/kinglerch)
#### Post date: [October 22, 2025, 12:12am UTC](https://forum.yarbo.com/t/antenna-breakage/3887/23 "2025-10-22T00:12:46Z")
FYI, you will also need TPU filament, so the antenna can flex. It can be complicated, but it’s a revelation to be able to print your own spare parts within an hour or so.
---
### Author:  [@ken.w.gregory](https://forum.yarbo.com/u/ken.w.gregory)
#### Post date: [October 22, 2025, 1:08am UTC](https://forum.yarbo.com/t/antenna-breakage/3887/24 "2025-10-22T01:08:39Z")
Totally agree! Break out that printer. Now is the perfect time.
---
### Author:  [@kinglerch](https://forum.yarbo.com/u/kinglerch)
#### Post date: [December 14, 2025, 2:29pm UTC](https://forum.yarbo.com/t/antenna-breakage/3887/25 "2025-12-14T14:29:47Z")
As an update, this flexible design is higher than the low mount (though lower than the high mount) and I have been leaving it that way through the winter with little or no change in GPS coverage since last winter. YMMV.
[Previous page](https://forum.yarbo.com/t/antenna-breakage/3887.md?page=1)