# Area Start Angle (user defined)

**URL:** <https://forum.yarbo.com/t/area-start-angle-user-defined/1872>\
**Category:** Suggestion and Feature Requests\
**Created:** [May 22, 2025, 1:09am UTC](https://forum.yarbo.com/t/area-start-angle-user-defined/1872 "2025-05-22T01:09:46Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Yarbo-Forum](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/yarbo-forum/32/126_2.png) [@Yarbo-Forum](https://forum.yarbo.com/u/Yarbo-Forum)\
**Post date:** [May 22, 2025, 3:21am UTC](https://forum.yarbo.com/t/area-start-angle-user-defined/1872/3 "2025-05-22T03:21:02Z")

</div>

Thank you for sharing your suggestion!

We completely understand your desire to align the cutting angles across all zones to achieve a more uniform and visually appealing result—especially for drone photography or when zones are close together.

We’ve already shared two related feature requests with our product team:

Allowing route angle adjustments in 1-degree increments [Allow Route Angle Adjustments in 1 degree Increments](https://forum.yarbo.com/t/allow-route-angle-adjustments-in-1-degree-increments/1761)

Enabling a shared 0-degree reference angle across all zones[Enable all work areas to have the same reference 0 degree angle](https://forum.yarbo.com/t/enable-all-work-areas-to-have-the-same-reference-0-degree-angle/1569)

We truly appreciate your feedback—it’s suggestions like yours that help us continue improving the Yarbo experience.

---

_[View the full topic](https://forum.yarbo.com/t/area-start-angle-user-defined/1872)._