# Blade hight after docking 

**URL:** <https://forum.yarbo.com/t/blade-hight-after-docking/4086>\
**Category:** Suggestion and Feature Requests\
**Created:** [October 15, 2025, 1:47am UTC](https://forum.yarbo.com/t/blade-hight-after-docking/4086 "2025-10-15T01:47:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Paul](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/paul/32/2797_2.png) [@Paul](https://forum.yarbo.com/u/Paul)\
**Post date:** [October 15, 2025, 1:47am UTC](https://forum.yarbo.com/t/blade-hight-after-docking/4086/1 "2025-10-15T01:47:36Z")

</div>

I think it would be a nice feature to add if the blade height could stay the same height that you set it during your cut. When the Yarbo is docked, I notice that after it docks, it puts it down to 0.8, and anytime it comes off of my base to my driveway, if it’s at that 0.8 setting, I can hear it come off the base and scrape a little bit. I have to remember to set it to a higher setting when I manually take it off the base.

---

<div class="post-metadata">

**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\
**Post date:** [October 15, 2025, 1:49am UTC](https://forum.yarbo.com/t/blade-hight-after-docking/4086/2 "2025-10-15T01:49:47Z")

</div>

You should heart this request.

> [@Blade Height Auto Adjust Back Up](https://forum.yarbo.com/t/blade-height-auto-adjust-back-up/4053):
>
> Since there has only been discussion and I’ve answered this question a few different times in the last few days across various platforms, I figured I would make this request formally. I searched before hand trying to find this, but didn’t find a formal request. Apologies if I missed it. Please offer one of the following solutions (or a combination) for correcting the behavior of automatically lowering the cutting height down to full down when the rover auto docks. This behavior is unexpected…

---

<div class="post-metadata">

**Author:** ![Yarbo-Forum](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/yarbo-forum/32/126_2.png) [@Yarbo-Forum](https://forum.yarbo.com/u/Yarbo-Forum)\
**Post date:** [October 15, 2025, 10:43am UTC](https://forum.yarbo.com/t/blade-hight-after-docking/4086/3 "2025-10-15T10:43:01Z")

</div>

Hello Paul,

Thank you for bringing this issue to our attention and for taking the time to share your detailed suggestions. We really appreciate your thoughtful feedback and the effort you put into explaining your experience.

I’ve passed your request along to our product team for review and consideration. Your input is very valuable to us as we continue to improve the user experience.

---

<div class="post-metadata">

**Author:** ![Paul](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/paul/32/2797_2.png) [@Paul](https://forum.yarbo.com/u/Paul)\
**Post date:** [October 15, 2025, 4:43pm UTC](https://forum.yarbo.com/t/blade-hight-after-docking/4086/4 "2025-10-15T16:43:50Z")

</div>

Thanks for bringing that up. Hearted