# Camera issues **URL:** \ **Category:** Software Issues\ **Tags:** snowblower\ **Created:** [January 26, 2026, 6:55pm UTC](https://forum.yarbo.com/t/camera-issues/5211 "2026-01-26T18:55:36Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 26, 2026, 6:55pm UTC](https://forum.yarbo.com/t/camera-issues/5211/1 "2026-01-26T18:55:36Z")
Hi all. Aren’t you just loving all the snow 🤣 Never has winter been this much fun ☺ Unfortunately my front camera has not worked since the new software update. Both firmware and lastest app have been installed and I did a reboot. I have also had error messages about the snowblower module no being installed but that has disappeared. Any thoughts on either? ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [January 26, 2026, 6:58pm UTC](https://forum.yarbo.com/t/camera-issues/5211/2 "2026-01-26T18:58:36Z")
If it was me, I’d completely power down Yarbo by unplugging the battery. Wait around 5 minutes, then reconnect the battery and turn Yarbo back on (using the button on the back). I’ve seen cases where a complete power down yields better results than doing a ‘restart’ via the app. Good luck. Let us know what happens. ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 26, 2026, 7:01pm UTC](https://forum.yarbo.com/t/camera-issues/5211/3 "2026-01-26T19:01:41Z")
Thanks. I will 😁 ---
**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\ **Post date:** [January 26, 2026, 7:26pm UTC](https://forum.yarbo.com/t/camera-issues/5211/4 "2026-01-26T19:26:28Z")
While you have it off, couldn’t hurt to reseat that module connector on the module too. Mind the screw in the snow though… Sigh. ---
**Author:** ![Yarbo-Forum](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/yarbo-forum/32/126_2.png) [@Yarbo-Forum](https://forum.yarbo.com/u/Yarbo-Forum)\ **Post date:** [January 27, 2026, 10:08am UTC](https://forum.yarbo.com/t/camera-issues/5211/5 "2026-01-27T10:08:30Z")
Please try the suggestion shared by our community member above. If the issue still persists, kindly **submit a support ticket** regarding the problems you’re experiencing so our support team can take a closer look. Thank you for your patience. ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 27, 2026, 12:27pm UTC](https://forum.yarbo.com/t/camera-issues/5211/6 "2026-01-27T12:27:29Z")
I will after the storm abates 😉🤣 ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 28, 2026, 6:56pm UTC](https://forum.yarbo.com/t/camera-issues/5211/7 "2026-01-28T18:56:43Z")
It looks like a pull tie is missing at the connector. I put one on ![17696262386581972363147095427746](https://canada1.discourse-cdn.com/flex007/uploads/yarbo/original/2X/e/e529312cd7d7008db51007511ccff06cb6736724.jpeg) ![17696265761133098915884219363403](https://canada1.discourse-cdn.com/flex007/uploads/yarbo/original/2X/0/073259fcf7b214c64050be6118d148d4a0cc2c2e.jpeg) ---
**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\ **Post date:** [January 28, 2026, 7:25pm UTC](https://forum.yarbo.com/t/camera-issues/5211/8 "2026-01-28T19:25:40Z")
Did that resolve your issues? ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 28, 2026, 7:40pm UTC](https://forum.yarbo.com/t/camera-issues/5211/9 "2026-01-28T19:40:01Z")
I also unplugged the battery for five and the front camera and “snowblower module undetected “ error is gone. ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 28, 2026, 7:41pm UTC](https://forum.yarbo.com/t/camera-issues/5211/10 "2026-01-28T19:41:07Z")
Camera is working ---
**Author:** ![ben.karrow](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/ben.karrow/32/3989_2.png) [@ben.karrow](https://forum.yarbo.com/u/ben.karrow)\ **Post date:** [January 28, 2026, 7:52pm UTC](https://forum.yarbo.com/t/camera-issues/5211/11 "2026-01-28T19:52:38Z")
Mine was never zip tied. Is it supposed to be? ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 28, 2026, 8:03pm UTC](https://forum.yarbo.com/t/camera-issues/5211/12 "2026-01-28T20:03:28Z")
It’s first season has been a doozy 😁 ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 28, 2026, 8:05pm UTC](https://forum.yarbo.com/t/camera-issues/5211/13 "2026-01-28T20:05:31Z")
I don’t think mine was either but there is a groove in the connector. So maybe there should have been 🤔 ---
**Author:** ![Tom.C](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/tom.c/32/4568_2.png) [@Tom.C](https://forum.yarbo.com/u/Tom.C)\ **Post date:** [January 28, 2026, 8:06pm UTC](https://forum.yarbo.com/t/camera-issues/5211/14 "2026-01-28T20:06:46Z")
Mine does not have a zip tie either. ---
**Author:** ![me1](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/me1/32/4557_2.png) [@me1](https://forum.yarbo.com/u/me1)\ **Post date:** [January 28, 2026, 8:37pm UTC](https://forum.yarbo.com/t/camera-issues/5211/15 "2026-01-28T20:37:32Z")
That is a lot of snow, all of them were cleared by Yarbo? ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 28, 2026, 9:03pm UTC](https://forum.yarbo.com/t/camera-issues/5211/16 "2026-01-28T21:03:39Z")
Yes. I send it out after 6-12 inches of snow fall. It’s getting a workout! So glad my wife finally let me buy it 🤣 ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [January 28, 2026, 10:26pm UTC](https://forum.yarbo.com/t/camera-issues/5211/17 "2026-01-28T22:26:10Z")
Excellent. Glad to hear it worked! ---
**Author:** ![laudav1285](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/laudav1285/32/119_2.png) [@laudav1285](https://forum.yarbo.com/u/laudav1285)\ **Post date:** [January 28, 2026, 11:44pm UTC](https://forum.yarbo.com/t/camera-issues/5211/18 "2026-01-28T23:44:25Z")
BTW I received my new belt. It looks quite different from the original. No metal fibres in the new one. The pulley has not arrived yet but is coming. ---
**Author:** ![me1](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/me1/32/4557_2.png) [@me1](https://forum.yarbo.com/u/me1)\ **Post date:** [January 28, 2026, 11:57pm UTC](https://forum.yarbo.com/t/camera-issues/5211/19 "2026-01-28T23:57:14Z")
That is excellent. ---
**Author:** ![me1](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/me1/32/4557_2.png) [@me1](https://forum.yarbo.com/u/me1)\ **Post date:** [January 29, 2026, 12:12am UTC](https://forum.yarbo.com/t/camera-issues/5211/20 "2026-01-29T00:12:10Z")
I also recommend putting large amount of dielectric grease on that connector before plugging it in, trust me. [Next page](https://forum.yarbo.com/t/camera-issues/5211.md?page=2)