# chaining together work plans sequentially

**URL:** <https://forum.yarbo.com/t/chaining-together-work-plans-sequentially/4652>\
**Category:** Yarbo Snowblower\
**Created:** [December 8, 2025, 12:30pm UTC](https://forum.yarbo.com/t/chaining-together-work-plans-sequentially/4652 "2025-12-08T12:30:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![goodstuff9](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/goodstuff9/32/378_2.png) [@goodstuff9](https://forum.yarbo.com/u/goodstuff9)\
**Post date:** [December 8, 2025, 12:30pm UTC](https://forum.yarbo.com/t/chaining-together-work-plans-sequentially/4652/1 "2025-12-08T12:30:34Z")

</div>

Is there a way I can chain together two work plans such that when work plan #1 finishes work plan #2 starts immediately?

(If this has already been addressed, I’m sorry, but I didn’t know for sure what search terms I should use, I might not have thought of the correct terminology to use when searching posts.)

---

<div class="post-metadata">

**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\
**Post date:** [December 8, 2025, 1:19pm UTC](https://forum.yarbo.com/t/chaining-together-work-plans-sequentially/4652/2 "2025-12-08T13:19:35Z")

</div>

> [@chaining together work plans](https://forum.yarbo.com/t/chaining-together-work-plans/4616/2):
>
> I believe the best approach to this would be to make a plan#3 that contains work areas from plan #1 and from plan #2 then run plan#3. You could maybe cobble together a couple schedules (schedule plan#2 at the approximate time that plan#1 should finish) that solution could run into problems if plan#1 takes longer than expected.
