# Inquiry regarding map misalignment and GPS coordinates offset

**URL:** <https://forum.yarbo.com/t/inquiry-regarding-map-misalignment-and-gps-coordinates-offset/6668>\
**Category:** Support & Solutions\
**Tags:** mapping\
**Created:** [June 22, 2026, 1:51am UTC](https://forum.yarbo.com/t/inquiry-regarding-map-misalignment-and-gps-coordinates-offset/6668 "2026-06-22T01:51:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sy\_kim](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/sy_kim/32/2789_2.png) [@sy\_kim](https://forum.yarbo.com/u/sy_kim)\
**Post date:** [June 22, 2026, 1:51am UTC](https://forum.yarbo.com/t/inquiry-regarding-map-misalignment-and-gps-coordinates-offset/6668/1 "2026-06-22T01:51:16Z")

</div>

Hello,

​I am experiencing a persistent issue with map alignment in the Yarbo app. I am currently located in South Korea, and while Google Maps is supported in my area, the Yarbo app displays my location approximately 1km away from my actual position.

​Because of this coordinate discrepancy, when I overlay the satellite view in the app, my work area appears on a completely different location, such as on the roof of a neighboring building. This makes it impossible to accurately set up my work boundaries.

​Could you please advise if there is a way to manually correct this location offset or recalibrate the coordinates? I have already checked for GPS signal stability, but the coordinate shift seems to be systematic rather than a temporary signal issue.

​I would appreciate any guidance on how to resolve this.

---

<div class="post-metadata">

**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\
**Post date:** [June 22, 2026, 2:16am UTC](https://forum.yarbo.com/t/inquiry-regarding-map-misalignment-and-gps-coordinates-offset/6668/2 "2026-06-22T02:16:29Z")

</div>

For the Google Maps view, you should be able to resize and move the map around. It doesn’t automatically line up your work areas to the map. I wish it did, but it takes some effort to line it up and size it appropriately to get close to your mapped areas.