# NetRTK
**URL:** https://forum.yarbo.com/t/netrtk/6041
**Category:** Support & Solutions
**Tags:** rtk, netrtk
**Created:** [May 8, 2026, 5:50am UTC](https://forum.yarbo.com/t/netrtk/6041 "2026-05-08T05:50:31Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@petbau](https://forum.yarbo.com/u/petbau)
#### Post date: [May 8, 2026, 5:50am UTC](https://forum.yarbo.com/t/netrtk/6041/1 "2026-05-08T05:50:32Z")
So we use NetRTK with the DATA-SIM and have sometime problems with the connection and GPS Signal.
The used DATA-SIM has a very good signal when installed into a Mobile Phone.
To see the Signal Quality there is the wonderful diagnostic screen which I added a screenshot here.
Some values are just on “0”. So is this screen even working?
Can someone explain how to see the real values and how to get a log of these values when the rover is moving?
---
### Author:  [@Yarbo-Forum](https://forum.yarbo.com/u/Yarbo-Forum)
#### Post date: [May 8, 2026, 8:32am UTC](https://forum.yarbo.com/t/netrtk/6041/2 "2026-05-08T08:32:28Z")
You can refer to the following Wiki passage for some additional reference [Diagnosis Tools | Yarbo Wiki](https://wiki.yarbo.com/en/troubleshooting/diagnosis-page-terminology)
---
### Author:  [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)
#### Post date: [May 8, 2026, 11:18am UTC](https://forum.yarbo.com/t/netrtk/6041/3 "2026-05-08T11:18:32Z")
Those fields haven’t been populated with data yet unfortunately. Feel free to up vote this linked post and I recently added this to it.
> [@Additional Diagnostic Information](https://forum.yarbo.com/t/additional-diagnostic-information/1285):
>
> I would like to see additional information displayed in the diagnostics screen. Specifically: GMT Time Module Height Mower cut height Battery percentage Battery Amps Battery Volts WiFi Status WiFi Signal Strength DC Satellites DC CNR DC GPS Signal Strength DC RTK Signal Strength Rover GPS CNR (per receiver) Rover GPS Signal Strength (per receiver) Rover RTK signal Strength (per receiver)