# New mower pattern for hills

**URL:** <https://forum.yarbo.com/t/new-mower-pattern-for-hills/8011>\
**Category:** Suggestion and Feature Requests\
**Tags:** lawn-mower\
**Created:** [November 15, 2026, 10:58pm UTC](https://forum.yarbo.com/t/new-mower-pattern-for-hills/8011 "2026-11-15T22:58:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![pvanmuyden](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/pvanmuyden/32/281_2.png) [@pvanmuyden](https://forum.yarbo.com/u/pvanmuyden)\
**Post date:** [November 15, 2026, 10:58pm UTC](https://forum.yarbo.com/t/new-mower-pattern-for-hills/8011/1 "2026-11-15T22:58:29Z")

</div>

I have two 24-degree hills, and the only reason I became part of the Kickstarter campaign was to mow those hills. Yarbo advertised that it could handle 35-degree slopes, which we all know by now it can’t. The latest brochures now recommend using snow tracks for these steep hills.

The problem is that, with Yarbo’s current turning methods at the top and bottom of the hills, I soon won’t need to mow those areas anymore. The unnecessary manoeuvres during turns, especially with the snow tracks, tear up most of the lawn. Using the sidewalk reduces the problem at one end of the hill but makes it worse at the bottom.

A potential solution would be to introduce a modified sidewalk option. When Yarbo backs down the hill, it should steer slightly so that, by the time it reaches the bottom, it has shifted sideways enough to line up for the next uphill pass.

See the illustration below, with blue indicating the uphill mowing path and red indicating the downhill reverse path.  
 ![image](https://canada1.discourse-cdn.com/flex007/uploads/yarbo/original/2X/7/77a191dd1eade087e10a1abe51f57eb03d3aff79.png)

By eliminating the turns at the bottom of the hill, this approach would save significant time, reduce wear and tear on the drivetrain, and, most importantly, prevent Yarbo from tearing up the lawn.

I was seriously considering giving up on Yarbo until I signed up with Yardstick, a company that seems to understand what customers are actually looking for. With Yardstick, I was able to straighten out my map boundaries directly from my desktop, something that should have been possible with Yarbo from the beginning.

For me, the perfect solution would be for Yarbo to focus on what it does best, developing and maintaining the hardware and leave the software side to Yardstick.

After all, the hardware is only as good as the software controlling it, and a robotic mower that destroys the lawn while trying to mow it rather defeats the purpose!

---

<div class="post-metadata">

**Author:** ![Yarbo-Forum](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/yarbo-forum/32/126_2.png) [@Yarbo-Forum](https://forum.yarbo.com/u/Yarbo-Forum)\
**Post date:** [November 16, 2026, 6:45am UTC](https://forum.yarbo.com/t/new-mower-pattern-for-hills/8011/2 "2026-11-16T06:45:22Z")

</div>

Hi there,

Thanks for taking the time to share your detailed feedback and suggestions. We understand how frustrating it can be to see your lawn damaged during turns, especially when using Yarbo on slopes.

Your idea of modifying the Sidewalk option to eliminate unnecessary turns at the bottom of the hill is a thoughtful suggestion. While this feature isn’t something we can accommodate in our short-term development roadmap, I really appreciate you taking the time to explain the potential solution and its benefits.

We’ll continue to monitor community feedback and interest in this area and share your suggestion with our product team for future consideration.

Thanks again for your honest feedback and for being part of the Yarbo community!

---

<div class="post-metadata">

**Author:** ![amosdeverman96366](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/amosdeverman96366/32/9171_2.png) [@amosdeverman96366](https://forum.yarbo.com/u/amosdeverman96366)\
**Post date:** [November 16, 2026, 7:09pm UTC](https://forum.yarbo.com/t/new-mower-pattern-for-hills/8011/3 "2026-11-16T19:09:44Z")

</div>

A smaller software change might get more traction than a whole new pattern: add a lateral offset setting that applies only while reversing down a slope. Even a fixed offset of roughly half the deck width would let each downhill reverse line up with the next uphill pass, so the turn happens at the top on flatter ground instead of at the bottom. It would also be easier to test and could be tied to the existing Sidewalk option rather than requiring new map tools.

---

<div class="post-metadata">

**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\
**Post date:** [November 16, 2026, 7:27pm UTC](https://forum.yarbo.com/t/new-mower-pattern-for-hills/8011/4 "2026-11-16T19:27:46Z")

</div>

They already have a good option for the snow blower called slope mode. It basically creates dead ends across an area. They would just need to bring this to the mower too and add some overlap. The user would select slope mode, draw an arrow the direction of the slope you want it to go head first and it goes up the hill and backs down then moves over and repeats (or the opposite if you select the slope the other way).

---

<div class="post-metadata">

**Author:** ![Don-Yarbo](https://avatars.discourse-cdn.com/v4/letter/d/7c8e57/32.png) [@Don-Yarbo](https://forum.yarbo.com/u/Don-Yarbo)\
**Post date:** [November 17, 2026, 6:23pm UTC](https://forum.yarbo.com/t/new-mower-pattern-for-hills/8011/5 "2026-11-17T18:23:59Z")

</div>

> [@pvanmuyden](#):
>
> I have two 24-degree hills, and the only reason I became part of the Kickstarter campaign was to mow those hills. Yarbo advertised that it could handle 35-degree slopes, which we all know by now it can’t.

Preach brother preach…exactly one of the reasons we got it too!
