# Trimmer question **URL:** \ **Category:** Support & Solutions\ **Created:** [May 29, 2026, 11:31pm UTC](https://forum.yarbo.com/t/trimmer-question/6326 "2026-05-29T23:31:35Z")\ **Posts on this page:** 4\ **Page:** 2
**Author:** ![cobradunn](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/cobradunn/32/298_2.png) [@cobradunn](https://forum.yarbo.com/u/cobradunn)\ **Post date:** [May 30, 2026, 8:28pm UTC](https://forum.yarbo.com/t/trimmer-question/6326/21 "2026-05-30T20:28:17Z")
Defective programming. This has been documented for a 1-1/2 years. Solidly confirmed on Dead Ends. I have one right now that I haven’t had time to fix. There are work arounds for these, you have to be incredibly careful how you lay them out and map them in order. Don’t even think about remapping just one of a set. You have to redo them all or who knows what you’ll get when you run it. ---
**Author:** ![B-Mod](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/b-mod/32/292_2.png) [@B-Mod](https://forum.yarbo.com/u/B-Mod)\ **Post date:** [May 30, 2026, 8:35pm UTC](https://forum.yarbo.com/t/trimmer-question/6326/22 "2026-05-30T20:35:58Z")
And that’s what I hate about yarbo. I have issues with S1, Could be fixed with dead end or sidewalks, but I am to afraid to try those, as I don’t need it causing even more issues. ---
**Author:** ![ben.karrow](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/ben.karrow/32/3989_2.png) [@ben.karrow](https://forum.yarbo.com/u/ben.karrow)\ **Post date:** [May 30, 2026, 9:37pm UTC](https://forum.yarbo.com/t/trimmer-question/6326/23 "2026-05-30T21:37:34Z")
I feel your S1 Sidewalk sentiment. ---
**Author:** ![bbeier](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bbeier/32/341_2.png) [@bbeier](https://forum.yarbo.com/u/bbeier)\ **Post date:** [June 19, 2026, 6:50pm UTC](https://forum.yarbo.com/t/trimmer-question/6326/24 "2026-06-19T18:50:14Z")
Tried to make my first memory path today. The path was around a small retaining wall defined by a NGZ. Finished and reversed the core up about 10’ still facing the direction of the path start. Created a plan and started it. Unfortunately it starts on the upper side of the wall. The core preceded to try to turn around and ignoring the NGZ, backed over the wall. It took it 2 tries to get completely over the wall. [Previous page](https://forum.yarbo.com/t/trimmer-question/6326.md?page=1)