# Trimmer questions

**URL:** <https://forum.yarbo.com/t/trimmer-questions/7671>\
**Category:** Support & Solutions\
**Created:** [September 27, 2026, 4:59pm UTC](https://forum.yarbo.com/t/trimmer-questions/7671 "2026-09-27T16:59:07Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![B-Mod](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/b-mod/32/292_2.png) [@B-Mod](https://forum.yarbo.com/u/B-Mod)\
**Post date:** [September 28, 2026, 4:08pm UTC](https://forum.yarbo.com/t/trimmer-questions/7671/21 "2026-09-28T16:08:05Z")

</div>

You did it correctly, now reassemble to see if your error goes away.

---

<div class="post-metadata">

**Author:** ![B-Mod](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/b-mod/32/292_2.png) [@B-Mod](https://forum.yarbo.com/u/B-Mod)\
**Post date:** [September 28, 2026, 4:09pm UTC](https://forum.yarbo.com/t/trimmer-questions/7671/22 "2026-09-28T16:09:18Z")

</div>

Push tabs were on the outside, that let you take the big plastic part off.

---

<div class="post-metadata">

**Author:** ![moyer.jeffrey](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/moyer.jeffrey/32/7663_2.png) [@moyer.jeffrey](https://forum.yarbo.com/u/moyer.jeffrey)\
**Post date:** [September 28, 2026, 9:38pm UTC](https://forum.yarbo.com/t/trimmer-questions/7671/23 "2026-09-28T21:38:50Z")

</div>

That must have been it. I have not received that particularly error anymore. Thanks again.

I am getting the line feed error very often again, but at least now the line is not broken and all I have to do Is reach down underneath the disc and pull on the line to advance it and then let it go on its way.

This of course means it cannot run autonomously, but the damage caused by the trimmer potentially going a little off course makes me hesitant to do that anyway.

---

<div class="post-metadata">

**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\
**Post date:** [September 28, 2026, 10:11pm UTC](https://forum.yarbo.com/t/trimmer-questions/7671/24 "2026-09-28T22:11:36Z")

</div>

You may need to increase the RPMs slightly

---

<div class="post-metadata">

**Author:** ![Yarbo-Forum](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/yarbo-forum/32/126_2.png) [@Yarbo-Forum](https://forum.yarbo.com/u/Yarbo-Forum)\
**Post date:** [September 29, 2026, 9:35am UTC](https://forum.yarbo.com/t/trimmer-questions/7671/25 "2026-09-29T09:35:23Z")

</div>

Hi there, glad to hear that the **loose lock error** has disappeared.

As for the **line feed error** , you can try Bryan’s suggestion and slightly increase the RPM to see if that helps. If the issue still occurs frequently, please contact our Support team so they can further investigate and see how they can help.

[Previous page](https://forum.yarbo.com/t/trimmer-questions/7671.md?page=1)