# Trimmer Running Memory Path In Reverse **URL:** \ **Category:** Yarbo Trimmer\ **Created:** [June 28, 2026, 1:32pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731 "2026-06-28T13:32:36Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\ **Post date:** [June 28, 2026, 8:19pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/21 "2026-06-28T20:19:01Z")
I wish they would extend everyone for a total of 3 years like Lymow and other companies have done. ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [June 28, 2026, 9:17pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/22 "2026-06-28T21:17:52Z")
I completely stopped using the sidewalks with the snowblower once the backward driving issue showed up. Haven’t used them since. ---
**Author:** ![ben.karrow](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/ben.karrow/32/3989_2.png) [@ben.karrow](https://forum.yarbo.com/u/ben.karrow)\ **Post date:** [June 28, 2026, 9:38pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/23 "2026-06-28T21:38:02Z")
I didn’t think about the warranty. Yeah our warranty will expire before tow mode. ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [June 28, 2026, 9:44pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/24 "2026-06-28T21:44:04Z")
That’s a sad thing to think about. But it’s probably true. ---
**Author:** ![w.borhauer](https://avatars.discourse-cdn.com/v4/letter/w/7c8e57/32.png) [@w.borhauer](https://forum.yarbo.com/u/w.borhauer)\ **Post date:** [June 29, 2026, 4:34am UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/25 "2026-06-29T04:34:37Z")
Tow mode, it’s only been discussed since 2023. My bet is winter of 2027. ---
**Author:** ![B-Mod](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/b-mod/32/292_2.png) [@B-Mod](https://forum.yarbo.com/u/B-Mod)\ **Post date:** [June 30, 2026, 6:23pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/26 "2026-06-30T18:23:18Z")
Another issue with the trimmer… Yarbo was in one area, and I started a memory path plan that starts in another area. Yarbo drove all the way to that area mowing grass and trimming. Now I have a huge mowed area straight across my front lawn. Another software issue. ---
**Author:** ![Yarbo-Forum](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/yarbo-forum/32/126_2.png) [@Yarbo-Forum](https://forum.yarbo.com/u/Yarbo-Forum)\ **Post date:** [July 1, 2026, 6:50am UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/27 "2026-07-01T06:50:16Z")
@B-Mod Could you please add this new behavior to your existing trimmer-related ticket #204149? This will help our team investigate the issue more thoroughly. Thank you! ---
**Author:** ![B-Mod](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/b-mod/32/292_2.png) [@B-Mod](https://forum.yarbo.com/u/B-Mod)\ **Post date:** [July 1, 2026, 9:46am UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/28 "2026-07-01T09:46:15Z")
I will do that, I did not know it did this till yesterday as I did not watch it move from one area to the next. ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [July 1, 2026, 1:25pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/29 "2026-07-01T13:25:07Z")
Makes me wonder if that is a fluke versus a behavior that happens every time. I haven’t heard anyone else mention it happening. Guess I’ll soon find out cause my replacement trimmer is finally going to be delivered on Friday. ---
**Author:** ![B-Mod](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/b-mod/32/292_2.png) [@B-Mod](https://forum.yarbo.com/u/B-Mod)\ **Post date:** [July 1, 2026, 2:02pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/30 "2026-07-01T14:02:09Z")
Well I guess I keep getting the flukes. 2 right in a row. I sent it to do a trimming job and it starts doing the wrong on in reverse. So I send it to another job and it mows and trims as it travels to the job. And I still 80% or more of the time get errors that after doing an area it can’t find it’s way back to the charger without me driving it about 10 feet and then trying again manually to get it to charge. ---
**Author:** ![Gabriele](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/gabriele/32/5860_2.png) [@Gabriele](https://forum.yarbo.com/u/Gabriele)\ **Post date:** [July 1, 2026, 2:29pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/31 "2026-07-01T14:29:48Z")
They still haven’t replied to me regarding the shipping for the replacement. My issue is a line error, but the cuts made while reversing follow the path I created. ---
**Author:** ![bryan.wheeler](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/bryan.wheeler/32/215_2.png) [@bryan.wheeler](https://forum.yarbo.com/u/bryan.wheeler)\ **Post date:** [July 1, 2026, 4:14pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/32 "2026-07-01T16:14:19Z")
Not a fluke. Many user reports of it. ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [July 1, 2026, 6:28pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/33 "2026-07-01T18:28:11Z")
> [@Gabriele](#): > > They still haven’t replied to me regarding the shipping for the replacement. How long have you been waiting for shipping info? ---
**Author:** ![Gabriele](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/gabriele/32/5860_2.png) [@Gabriele](https://forum.yarbo.com/u/Gabriele)\ **Post date:** [July 1, 2026, 7:01pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/34 "2026-07-01T19:01:54Z")
15 day ---
**Author:** ![B-Mod](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/b-mod/32/292_2.png) [@B-Mod](https://forum.yarbo.com/u/B-Mod)\ **Post date:** [July 1, 2026, 7:06pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/35 "2026-07-01T19:06:08Z")
I would give them a little nudge, but then they might ask for a video like they did for me, lol. ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [July 1, 2026, 7:06pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/36 "2026-07-01T19:06:16Z")
Call Yarbo Support and ask that your ticket be escalated. Be polite, but reference the extended delay and that you need a swift resolution. ---
**Author:** ![Gabriele](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/gabriele/32/5860_2.png) [@Gabriele](https://forum.yarbo.com/u/Gabriele)\ **Post date:** [July 1, 2026, 7:07pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/37 "2026-07-01T19:07:33Z")
I’ll write to them again, because I don’t speak English, so I can’t call them 🤣 ---
**Author:** ![rgloverii](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/rgloverii/32/956_2.png) [@rgloverii](https://forum.yarbo.com/u/rgloverii)\ **Post date:** [July 1, 2026, 7:13pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/38 "2026-07-01T19:13:35Z")
This is why we need a Universal Translator (Star Trek reference), to eliminate such barriers! @Yarbo-Forum : Can you please assist @Gabriele in prioritizing his trimmer replacement? ---
**Author:** ![Gabriele](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/gabriele/32/5860_2.png) [@Gabriele](https://forum.yarbo.com/u/Gabriele)\ **Post date:** [July 1, 2026, 7:17pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/39 "2026-07-01T19:17:19Z")
Thanks …i send email a support yarbo . Ticket 202838 ![Screenshot_20260701_212035_Gmail](https://canada1.discourse-cdn.com/flex007/uploads/yarbo/original/2X/4/402c9f4de5c217bebbcdf48198fe64f3de3c1eb2.jpeg) ---
**Author:** ![Gabriele](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.yarbo.com/gabriele/32/5860_2.png) [@Gabriele](https://forum.yarbo.com/u/Gabriele)\ **Post date:** [July 1, 2026, 7:27pm UTC](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731/40 "2026-07-01T19:27:02Z")
Don’t worry, they had already asked me for the photos, which I promptly sent them. [Previous page](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731.md?page=1) [Next page](https://forum.yarbo.com/t/trimmer-running-memory-path-in-reverse/6731.md?page=3)