It doesn’t need to do the turn in function along the “top” of the slope when transitioning to the next pass. In fact rather than perimeters we should have the option to do 1-3 passes along the “top” of the slope before doing any of the other passes “down” the slope.
4 Likes
Hi there, thanks for sharing your suggestion. We appreciate you taking the time to explain it so clearly. If more users express interest in this as well, I’ll be happy to pass it along to our product team for further consideration.
2 Likes
Anyone else missing passes along the outside edge of slope mode? I feel like at least 1 more pass could be made closer to the edge on each. If we can get adjustable boundary’s per edge that would help too I think. I’m running 0” safety boundary and slope mode seems to leave a lot more than that still, even when they said they decreased the built in boundary in the last update.
The adjacent zones are basically the same size. If I forget and run circular or parallel to increase speed on “lighter” mornings it will sometimes get stuck getting to those deep spots.
1 Like
Seems like it needs a perimeter line on each side…
1 Like
Hi there, thanks for sharing the detailed feedback and photos. I understand what you’re seeing with the outer edge coverage in slope mode.
I’ll make sure to pass your feedback about the perimeter behavior and the idea of adjustable edge boundaries to our team for review. We appreciate you taking the time to point this out and explain how it affects real-world use.
2 Likes