I often get yarbo claiming “track slippage” and needs me to intervene, but when I go into the remote, I can drive yarbo out with no effort. It’s like the auto mode “gives up” with little effort. At least some setting telling Yarbo how hard I want it to try to “unslip” would’ve nice to give it more p…

The newer firmware seems better in some regards, but when it does get stuck it seems to almost always end up high centered:sweat_smile:. Seems like they have it lifting higher before executing maneuvers now and they’ll even shut down the auger when waiting for the chute to change directions someti…

I agree. It may need to back up, left the augur, then continue

My tracks slippage is 90% at the perimeter-unless it snags an ice spot/shelf I think doing a double perimeter pass helps immensely. Then make all your turns within the confines of the 2 perimeter passes. This way you aren’t always dragging the front across unplowed areas. Once those tracks start di…

It tries reeeaaaallllyyyyy hard sometimes on the new FW…It got high centered on the snow from the van tracks(wife came home early due to white out), it was spinning tracks for almost 10 minutes, and many times it gets unstuck…but not always. Here’s another one [image] And sometimes it gives up l…

Hi there, thanks for your feedback. We’ve received similar input from other users as well, and we’ve made some optimizations to the track slippage detection and the snow blower’s escape logic in the next release. We hope these improvements will help it perform better and reduce the need for manual i…

When the new software is released, will we have detail oriented release notes that list all changes so we know what to look for and what to re-test?

So close :smiley: Firmware V3.12.0 & App V3.17.4 Release Notes & Feature Highlights

I appreciate the firmware release announcement details of course, but I don’t think they extend into what I would call proper release notes with detail around each change and fix. Still, better than nothing! :slight_smile:

“Track slippage” level

Suggestion and Feature Requests

rcguymike January 21, 2026, 5:28pm 13

So close Firmware V3.12.0 & App V3.17.4 Release Notes & Feature Highlights

Topic		Replies	Views
Snow blower track slippage Support & Solutions snowblower	12	99	March 3, 2026
Move on already - Snowblower and Slipping Suggestion and Feature Requests	14	220	January 5, 2026
Right hand track is slipping Yarbo Snowblower	6	126	February 16, 2026
Yarbo gets stuck - linear actuator solution? Support & Solutions snowblower	7	149	January 28, 2026
Clearance Issues - Self Recovery / Unstuck mechanism Suggestion and Feature Requests	27	328	July 31, 2025

“Track slippage” level

Related topics