I thought this was fixed last year. But here I am with 6” uncut areas. This area was mapped clockwise driving ON the mulch [IMG_9941] [IMG_9942] [IMG_9945]

Possibly some slight map drift? I think safety buffers are bugged until the firmware updates TBH.

I have never had any map drift. This is the entire perimeter of the bed, not an isolated spot. And multiple NGZ, new and existing.

Well hopefully it’s just the mismatch of firmware/app causing the safety buffer not to be respected and the update will fix that for you.

Obviously you have no fault in any of this, but it’s getting ridiculous.

You can fix this if you buy an amazing Yarbo trimmer attachment…..

don’t do it it will never come. :roll_eyes: you still have to trim for the next 2 years. i speak from experience. :grin:

Hi there, we have indeed removed the default safety buffer, and Yarbo should follow exactly along the boundary you set if the safety buffer is set to 0 inch. This may require further investigation from our team to confirm the root cause.

This is different NGZ from yesterday. It’s actually a 12” from where it should be. Is anyone else seeing this? I have even deleted and recreated a couple NGZs and nothing changes. [IMG_9948]

Great idea… Oh but wait, you can’t order one. It’s not available in the store :slight_smile:

Mowing 6” Away From No-Go Zones

Support & Solutions

bryan.wheeler April 15, 2026, 12:29pm 13

You do have NGZ edges enabled for cutting? I know it still leaves a buffer a bit though.

Topic		Replies	Views
12" Margin on NGZs Software Issues lawn-mower	54	298	April 29, 2026
Template Circle Size Support & Solutions lawn-mower , mapping , template	3	32	April 24, 2026
Perimeter cutting Support & Solutions lawn-mower	13	298	August 13, 2025
widen perimeter Support & Solutions	18	160	August 20, 2025
Global Safety Buffer Support & Solutions	8	79	December 25, 2025

Mowing 6” Away From No-Go Zones

Related topics