Has anyone suggested an option to set the height of S1 module at launch? The default height is too low and it bangs unnecessarily coming off the dock. I just need another .5 inch or so.

All my areas, pathways, and sidewalks are set to 2.01in & dock clear 0. My concern is launch-Before I launch it I will manually take control and raise the module to 2.01 height. Go back to the app and stat a plan. it will correct my module position lower the height below 2.01, launch, bang the s…

Thanks for your suggestion and for explaining the scenario where you need this feature. I’ll pass your idea along to our product team for consideration. If you have any other feedback, feel free to share!

Yes, I have suggested this many times. Yarbo says it’s necessary to remove gathered snow in front of the dock. And I said “Great, but what if there’s only ice, or gravel in front of the dock? Yarbo is pushing futilely, unable to undock, because it insists on the lowest possible auger setting!” But …

Hmmm, I thought it was going to the height of the path exiting the dock…

I wish. It won’t reach that height for several feet beyond the dock.

Is that what they mean by plow mode?

cross link: Dock clearing height setting

Setting Module Height Exiting Dock

Yarbo Product Talk Yarbo Snowblower

rcguymike November 24, 2025, 9:39pm 7

Yikes confirmed…

It lowers then launches, stops and then raises back up to the 2.01” path height

Dock clearing height setting

Topic		Replies	Views
Snowblower - Raise before moving from Dock Suggestion and Feature Requests	9	113	December 22, 2025
Dock clearing height setting Suggestion and Feature Requests	14	155	November 25, 2025
Snow blower “charge” command from software Yarbo Snowblower snowblower , yarbo-app	1	68	November 10, 2025
Auger height when returning to charge Support & Solutions	2	45	January 4, 2026
Blade Height Auto Adjust Back Up Suggestion and Feature Requests accepted	35	432	November 11, 2025

Setting Module Height Exiting Dock

Related topics