After swapping my lawnmower module to the snowblower module, the front camera is no longer working. Not sure whether there was a firmware update that the snowblower module has not received or there’s another issue. The unit was powered down during the swap. I have tried to restart the unit and I still have the same issue. I’ve also checked the main connection between the snowblower and the main module. This is a 2024 version. Any ideas would be welcome.
Check the bottom of the diagnostics screen. Look for a status of anything other than zero. If it is, then support will need to fix it remotely. I would submit a ticket either way if you haven’t already.
Hi there, I checked your latest support ticket in our system, and it looks like our support team has already helped resolve the issue. If you have any other questions or need further assistance, please feel free to reach out.
2 Likes
FWIW - I had the same exact issue but a reboot fixed it in my case.
3 Likes
I had front camera issues many times after switching to the Snow Blower module. Error appeared on the main screen. The most interesting was that front camera was displaying video from Smart Vision screen, but it started with delay comparing to the other cameras. Only restart helped in my scenario.
2 Likes