HaLow signal is almost non-existant, yarbo dead in the water, support is MIA

[steve]

@cobradunn

maybe something to check.

Yep. I did a study on it.
“It used to be -75ish directly under the DC. Now it’s -23.”

Halow range

Names of things: [image] Doesn’t matter if it’s the male or female. Turns out, they’re the same basic shape but one does not have a pin, and the other is upside down. [image] The female on the core, obviously, does not have a pin. The base is the top of the hex nut. The “plastic” is that gold socket in the center. The base dictates how far down you can screw the whip. Top to base - 4.16mm Top to plastic - 2.03mm Plastic to base - 2.13mm [image] Core’s whip has a pin, plastic, and a …

@Wally-schatt , remove the halo whip from the core, remove that rubber washer, and put the whip back on. Check the DC as well for that rubber washer as well, if you can.
See if that changes anything.