My yarbo finished a work area last night, drove onto its charging pad, which has the blue light on. The core said “Ready to chanrge” after about 10 seconds it said “Charging failed” I tried to re-align it several times with the exact same result. I went to bed and tried again this morning. same …

Like many here, I had to get a new core to fix wireless charging. Now my physical controller won’t connect to the new core. It worked fine with the original core. Anyone found a way to reset and reconnect?

This should get you going. https://support.yarbo.com/portal/en/kb/articles/how-to-reconnect-yarbo-with-the-controller-7-11-2024

Thanks but unfortunately , I had already tried that procedure multiple times and can’t get the controller to pair with the new core.

do you have a support ticket on it?

Hi! Here’s a step-by-step guide to help you reconnect your physical controller: Press and hold the power button on the Yarbo until the tail lights turn blue. This means your Yarbo has entered pairing mode. Next, press and hold the logo button on the physical controller for 3-5 seconds until th…

@Frederic also make sure the switch on the bottom of the controller is not set to phone mode. [image] Reference support article. [image] [2024] Yarbo Physical Controller Instructions Connecting physical controller to Yarbo Connecting physical controller to mobile phone Yarbo Controlle…

I also have charging issue. Have been talking with support a week now and still no fix. They “fixed” it via OTA, but it isn’t still working for me. It chooses randomly when to charge and when not. Somehow it worked few days after the OTA fix, but today it started all over again and now it sits 100% …

Does it show green or yellow on the battery icon in the app? Green is charging. Yellow is not. It’s normal for it to flash blue sometimes. It’s discharging the battery periodically to maintain its health. As long as the rover thinks it’s charging and reports that, you should be good to go

When it charges, then it is green. But right now it is yellow and can’t get it to charging. I had a temporal fix for this before (drove Yarbo off the pad and then hit the recharge button and then it went to charging pad autonomously and it started charging). Today I tried that 3x and it didn’t work…

Have you tried power cycling the docking station and also pulling th battery cable on the rover for a few mins? Pull power to both for about 5 mins and then power up the dock, then the rover. If that doesn’t get it, they probably need to reapply the fix or diagnose if the dock is going bad.

Charging Pad blue yarbo won't charge

Support & Solutions Charging Issues

bryan.wheeler April 29, 2025, 3:36am 34

@Frederic also make sure the switch on the bottom of the controller is not set to phone mode.

Reference support article.

Topic		Replies	Views
Docking station setup saved, but wireless charging still fails — support missed remote troubleshooting window Support & Solutions docking-station	40	199	April 7, 2026
Won’t Charge on docking station Charging Issues	20	295	October 22, 2025
Battery Temperature Problems Support & Solutions	171	2660	October 3, 2025
Battery Charge temps Charging Issues	36	789	July 8, 2025
Yarbo stopped charging on docking station and manual charger is not charging Support & Solutions	13	307	May 13, 2026

Charging Pad blue yarbo won't charge

Related topics