on initial instalation data center never turns on
Make sure you are plugged into the POE injector on the POE port. This should plug into the WAN port on the data center. The LAN side of the POE injector (short ethernet cable) should plug into your home router.
Welcome @goobs500. Keep posting your questions and we will be here to make sure you are up and running. The best we know.
1 Like
Hi there, we’re not sure about the root cause based on the information provided. Please check this video to make sure all the required steps have been completed https://www.youtube.com/watch?v=71e6X09iTKE. Also, as Bryan mentioned, please pay special attention to his suggestions. If the issue still persists, feel free to share more details so we can help you troubleshoot further.
1 Like