The unit immediately goes to the perimeter of an area and stops. I get the “Yarbo is adjusting the blade message” but there is no sound of any adjustments. After a while, the Yarbo gives up and returns to the base. There is no blockage, the Yarbo is fully charged, and I have the latest updates. This…

This is from the Official Yarbo discord on this same issue: It will be one of the following three causes: M25 wire harness connection issue, Grass buildup or debris jammed in the cutting disc area, Malfunction of the cutting motor or cuting height motor, Will need to solve through e…

Had exactly this happen to me yesterday. I solved it with the 1 minute power button reset (hold the button behind the robot for 60s even when it shuts down and release, if it doesn’t boot you can then press 3s to boot it). Not sure if it was just luck but it did work for me. Before that I had tried…

I hope that works. Please keep us posted.

Thanks. The 60 second rebooting did not work. Back on July 4, that is how I got the unit going again after I experienced the same problem, but now it is not doing the trick. The ticket I put in still has not been handled (apart from a message saying it was forwarded to the engineers). Meanwhile, the…

The result: the Yarbo engineers concluded there is a main power sampling short circuit in the mower module, so they are replacing the module.

Thanks for the update. At least there is a fix headed your way.

I missed 1 week of mowing while waiting on the mower replacement. I’m on my third mow and it’s looking better. Took a lot of cleaning the mower and some cursing may have happened.

I am having this same issue. Ticket has been submitted. How long did it take for you get a solution worked out?

Mine did this exact same thing, first time mowing after the last software update… although was about a week later. Seems like a software issue but who knows. I put in a ticket last Friday and replacement is scheduled to arrive tomorrow (so right at one week). That includes some pauses on my end w…

Thank you for the response! One week is reasonable to me as well. I will go ahead and upload the video just in case they need it.

Lower the discs all the way down and make sure nothing is up underneath on the guards or behind the discs or on the disc motors. Any video and picture evidence preemptively provided should help your case.

Stuck on “Yarbo is adjusting the blade”

Support & Solutions

ken.w.gregory August 14, 2025, 7:35pm 13

Also maybe check how far the cutting disks extend.

like this.

Topic		Replies	Views
Mower light not working along with other odd behavior Support & Solutions lawn-mower	15	122	May 20, 2026
Error Please wait until the blades reach the required speed Support & Solutions	83	1246	September 29, 2025
Blades not running even not with controller Support & Solutions	48	525	July 25, 2025
Cutting Height Motor Drive Issue Hardware Issues	77	1639	September 4, 2025
"Adjusting blades" message during the work plan Support & Solutions lawn-mower	6	54	May 13, 2026

Stuck on “Yarbo is adjusting the blade”

Related topics