I recently had issues with my Yarbo Core. :sad_but_relieved_face: I ordered the Snowblower/Pro Module package during the initial launch of the Pro Module series. I received the Core (and all it’s goodies) near the end of July 2025. And I waited, patiently -of course, for the Pro Module to arrive. So, my Yarbo Core seen minimal action, sitting firmly upon the charging dock awaiting it’s Pro Module buddy. :hourglass_done: Fast Forward 3 Months Later… :fast_forward_button: The Yarbo Core I purchased in July simply would not charge on the docking station. It would line itself up and then give the shout-out, “Ready to Charge”, yet failed to charge. The Yarbo Team worked their Magic and confirmed the charging unit inside the Core was faulty. :warning: Fast Forward 3 Weeks later… :fast_forward_button: The replacement of my Yarbo Core arrived a few days ago. And, so far, so good. It works as expected. Yippee! :tada: However, I couldn’t help but notice the Core that I received a few days ago now has a metal cover inside protecting the wiring, speakers, and such. Excellent Idea! :light_bulb: Now, I’m no engineer by no means, but… Why didn’t ALL Yarbo Cores come with this metal casing? Kind’a makes ya wonder… Perhaps the built-up grass debris seen in the picture had something to do with not charging? :thinking: [20251015_191432(1)] [20251015_185859(1)] [20251015_191347] [20251015_185912]

[image] ken.w.gregory: “I would like to acquire the plastic cover inside protecting the wiring, speakers, and such to install on my 2024 core. Please include instructions and mounting hardware. Thank you in advance.“ Thanks Ken, I opened a ticket. #132907

Actually I just thought of a possible pro/con, it might help keep heat in a bit in winter, that might be a con in summer though

My experience was the opposite. The first core received in August had this plastic bulkhead but the replacement core received end of October did not so we transplanted some parts. Our 3rd core did have it fitted No 2 are alike

I’m going to guess that they tested this & figured it didn’t add enough heat to be a concern

I didn’t notice a difference with mine. It’s still fairly open.

Thanks Ken for the template. I opened a ticket as you suggested and received and installed the plastic cover on my rover. The video Yarbo provided was quite easy to follow and instalation was a snap. The video requested that pictures be taken at various points in the instalation. Do you know whether these pics should be sent to Yarbo? Best regards, Alvin

They don’t need to be sent. Those steps were for the testers. They just didn’t edit the video to remove that. Probably not a bad idea to have them if there’s ever an issue or concern, Yarbo could request them.

Thanks Bryan! I will archive the pics so I will have them if they ever ask. Best regards, Alvin

Couldn't Help but Notice

Yarbo Product Talk Yarbo Core

bryan.wheeler March 31, 2026, 4:58pm 66

Topic		Replies	Views
Wire Covering Installed Support & Solutions yarbo-core , wire-cover	24	495	November 25, 2025
New Yarbo Heat Reflective “Core Skin” Yarbo Product Talk	184	1755	September 11, 2026
Core smells like it let out the magic smoke General Issues	64	1009	December 1, 2025
Dividing wall on "25" model. Yarbo Product Talk	11	215	February 16, 2026
Fixing the bent frame holding the rear cover closed from shipping. Support & Solutions lawn-mower	46	817	June 28, 2025

Couldn't Help but Notice

Related topics