No parts there either.
not yet, it’s stubbed out for it. Hopefully soon!
Glad to help and I like this open forum. Further info/ back history. I removed the guards issue improved a little. Once I removed the brackets, game changer cause now I had about 4 inches head space. Perfection. Only change yarbo should do is change motor rotation (clock wise for counterclockwise) between cycles then I wouldn’t have to dlip blades every 2 week, (changing blades on a 4 week cycle)
3 Likes
I think if they didn’t have to ship the blade guards they would totally do this. If they spun the discs in the opposite direction, it would push the grass into the brackets and guards instead of the center of the mower. But, I would like to see this feature to try and clear clogs and foreign debris. Much like the snow blower has the reverse auger button on the controller. Have a reverse blades manual option as well as do it automatically after a mow to hopefully blow the grass off the guards some.
2 Likes
I like your thought process about spin process, your probably correct. But if they added a check box function of "guards removed " to naturally change spin rotation from one cycle to the next could be an option of future updates, 
. A boy can dream.
2 Likes
..edited and removed
I’ve just checked with our logistics team regarding your orders, and here’s the latest update:
Order #1977: The delay in delivering the blower is due to limited storage availability at our U.S. warehouse. The new batch of blowers is about to leave the port and is expected to arrive at the U.S. port around June 12th. We sincerely apologize for the extended wait. Once the new shipment arrives, we will promptly ship the blower to you.
Order #2954: This order includes track grease and a Bluetooth antenna for the data center. The delay is due to a shortage of track grease in storage. I have already contacted the logistics team to send the Bluetooth antenna first, and we will ship the track grease separately once the new batch arrives.
Order #3547: I was unable to locate this order using either the order number or your email address. Could you please send us more details via direct message so we can assist you further?
Thank you for your patience and understanding!
2 Likes
Haha, larger question may be is your yarbo old enough to make YOU drink yet! 
2 Likes
Absolutely!!! I may of had a coupe throughout this process 
3 Likes
I have recently been having this issue on one side as well. I thought the screw may have come loose but then it happened twice since then. Not sure how the blade can do that.
1 Like
Seriously hope that is just it cutting across to get to the next section/NGZ/start point/etc. 
1 Like
Gotta be some kind of record here. 19 seconds to complete the work plan at 21% battery. 1 little bitty line to go.
NOPE!
Off to charge.
Gotta wait for a charge cycle to finish that last itty bitty bit.
I just pause the plan and change the recharge limit to 15% when I see that. You could also let it get some charge and then hit resume and it will finish.
1 Like
Ok. Ok. You caught me. I needed a break from watching Yarbo so I could get some other chores done around the house. After other chores, I took Yarbo over to the “wash station” for a bath. During the bath I noticed a cracked mowing disk. 
Ticket # 90065 @Yarbo-Forum
@Yarbo-Forum any word on how the “New Version Cutting Disk” is faring in beta tests?
1 Like
I’ve reviewed your support ticket and will follow up to ensure you receive smooth support.
Regarding the testing of the two new cutting disk designs, we’re still in the testing phase and gathering feedback, so we can’t provide detailed information just yet. We appreciate your interest in the new designs!
3 Likes