Ugh I’m not sure what’s going on!!! I just did a full work plan on my new pro mower. Went out to check its work and I don’t think it cut at all!!! It just drove the whole plan but didn’t cut anything… I thought this was happening so i stopped the plan at a certain point. Lowered the blades to 2.7 an…

Try manually mowing with your phone or the controller, see if that works.

I agree with @B-Mod . This is a good way to determine if the issue is with software or hardware. Or at least help point in the right direction. Candidly, I’ve never heard of this issue happening before. So we’re all winging it in terms of helping to figure it out. At least we’re not saying “oh yeah,…

[image] Evidence of Yarbo not CUTTING!!! Support & Solutions Did you put the straight blades on and are they installed in the correct orientation? There is a this side faces grass and a L and R for each blade. What cutting height are you set to?

Hi there, really sorry to hear about this—that’s definitely frustrating, especially after running a full plan. As one of our community members mentioned, could you first double-check that the blades are installed in the correct direction? Next, it would be helpful to try a short manual mow test. T…

I ended up setting it below the recommended height and was able to see that it cut. I guess maybe it’s cutting its just quite a rough cut?! I assumed it would be cleaner/ nicer looking and I’d be able to see the lines and evidence of nice cuts when looking closely at the grass after “mowed” if you…

Not that I’ve noticed but on Tall Fescue you can’t cut it at 4 inches. It will look like it pushed it over. For the Pro mower I’ve found 3.5 or 3 inches work best. For the discs on either it needs to be 3 inches or lower. I would definitely double check that your blades are oriented properly and…

I wanted to update and say I did have the blades switched for left and right. I put them in the correct positions and it made all the difference! I would have thought the moving direction wast front. I missed the little symbols in black. Thanks, it’s doing a good job out there mowing right now …

Glad to hear there wasn’t a problem with your Yarbo. Hopefully things will be nice and smooth for you going forward.

is left not from the perspective of moving forward? where are the little black symbols?

The core itself left is oriented as you face the rear of the core. From the Mower Pro perspective, if you flipped the module straight up (connector and module connection on the ground, cameras in the air), Left is as your looking at the mower. There is an L and R stamped into the black plastic cas…

Pro mower not cutting!

Support & Solutions

bryan.wheeler April 30, 2026, 2:32am 4

Topic		Replies	Views
Evidence of Yarbo not CUTTING!!! Support & Solutions lawn-mower , help	6	151	May 8, 2026
Build up on straight blades after one use making them useless to cut grass Support & Solutions	4	108	April 17, 2026
Lawnmower Pro Blades not Engaging On Plan Support & Solutions lawn-mower , yarbo-app	7	57	May 18, 2026
"Adjusting blades" message during the work plan Support & Solutions lawn-mower	14	145	June 11, 2026
First Mower Pro Run Yarbo Lawn Mower lawn-mower , yarbo-mower-pro	23	551	October 28, 2025

Pro mower not cutting!

Related topics