Cutting height adjustment problem

Support & Solutions
3

Is this the problem you are seeking help with?

IMG_3073.PNG
IMG_3073.PNG1125×2436 85.8 KB

If so, here are some things that get me going at least for a little while.

In no particular order:

  1. Restart Yarbo. (It’s Restart Yarbo System. Its in the Yarbo Settings-> Safety Settings → Restart Yarbo System)
  2. Shut down Yarbo. Disconnect the core’s cable to the mower. Start up Yarbo. It will detect no attachment. Shut down Yarbo. Reconnect the core cable to Mower. Restart Yarbo.
  3. Shut down Yarbo and disconnect Yarbo’s Battery. Pull the POE power cable to the Data Center. Wait 5 minutes. Apply power to the Data Center. Wait 5 minutes. Reconnect the Yarbo’s battery cable. Wait for “Ready for Work” and see if your issue is resolved.

All three of these have worked for me, but unfortunately they are all temperary fixes.

Also if you haven’t check out This thread

Good luck and let me know if any of these help in your situation.